Porsche 944 Manual de usuario descargar pdf (Pagina 85)

944 Engine/Cylinder Head, Valve Drive

Installing Camshaft Seal

Place sealing washers in bearings and

install bearing bridge with Loctite 574.

Tightening torque 20 Nm (15 ftlb).

87/465

After torquing the bearing bridge, install

sealing cover with the aid af Special Tool

9234

86/925

Engine installed

Note:

If the sealing cover af an engine leaks with

the engine installed, the procedure for

installing the cover is as follows:

Place camshafts and sealing washers in

bearing.

2. Apply Loctite 574 to bearing bridge and

install. Place a 0.20 mm feeler gauge

between bearing bridge and cylinder

head

and tighten botts slightly by hand.

928/01

Apply a light film af oil to sealing cover

and

press an by hand. Tighten bearing bridge

to 20 Nm (15 ftlb).

Installing Camshafts Seal

Printed in Germany - XVII, 1988

15 - 112a

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 166 167

Sin comentarios

Porsche 944 Manual de usuario Pagina 85